Let’s be real for a second. Most "final battle" playsets from LEGO end up being a clunky mess of gray plates and half-finished walls that look okay from the front but like a construction site disaster from the back. But the Spider-Man Final Battle LEGO set (officially known as set 76261, Spider-Man Final Battle) actually did something weirdly ambitious. It didn't just give us a slice of a building. It gave us the head of the Statue of Liberty.
Honestly, it’s a flex.
If you followed the hype around Spider-Man: No Way Home, you know the third act was basically a fever dream for Marvel fans. Bringing back Tobey Maguire and Andrew Garfield alongside Tom Holland wasn't just fanservice; it was a logistical nightmare for a toy company. How do you fit three Spider-Men, a handful of Multiverse villains, and a giant copper landmark into a box that costs less than a car payment?
LEGO’s solution was the 360-degree diorama. It’s a departure from the "dollhouse" style they usually go for with movie tie-ins. Instead of a flat facade, you get this rounded, scaffold-covered bust of Lady Liberty that looks decent from literally any angle. You’ve probably seen the "Battle at the Statue of Liberty" sets before, but this one is the first time it feels like a collector's piece rather than just a pile of bricks for a seven-year-old to smash.
The "Three Spideys" Factor: What the Spider-Man Final Battle LEGO Set Got Right
The main reason people buy this set isn't for the copper-colored bricks. It’s for the minifigures. You get "The Friendly Neighborhood Spider-Man" (Tobey), "The Amazing Spider-Man" (Andrew), and "Spider-Man" (Tom).
It sounds simple, right? Just pack in three guys in red spandex. But LEGO actually bothered to distinguish the suit prints. Tobey’s suit has those classic raised silver webs. Andrew’s has the larger, more expressive eyes and the darker blue tones. It’s that level of granularity that makes the Spider-Man Final Battle LEGO set stand out to people who actually care about the lore.
Then there’s the villain lineup. Doc Ock, Green Goblin, Electro, Sandman, and The Lizard.
Wait. The Lizard.
Finally.
Fans had been complaining for years about the lack of a proper Lizard minifigure. In this set, he’s not a "bigfig" like Hulk or Thanos. He’s a standard minifig size, which some people hated, but it actually scales better with the frantic, crowded nature of the scaffolding. Seeing Electro with those transparent yellow lightning bolts sticking out of his back next to a metallic-armed Doc Ock? It’s pure chaos in the best way possible.
Engineering the Chaos: Why 360-Degree Design Matters
Most LEGO sets are meant to sit on a shelf against a wall. The back is usually ugly. It’s just open plastic and structural supports. But the Spider-Man Final Battle LEGO set is built on a circular base. This is a huge shift in LEGO’s design philosophy for the Marvel line.
Think about how you’d display this. You can put it in the middle of a coffee table, and it still looks like a complete scene. The scaffolding isn't just there for show; it acts as a literal jungle gym for the minifigures. You’ve got clear "pose bars"—those thin, transparent plastic rods—that let you make it look like Peter 2 and Peter 3 are mid-air.
It’s tactile. You can move the Sandman hand. You can swing the portal open. Ned and MJ are hanging out in the back, probably looking for a way to stay out of the crossfire.
The build itself uses about 900 pieces. It’s not a massive, thousand-hour project like the UCS Millennium Falcon, but it’s dense. There’s a lot of SNOT (Studs Not On Top) technique going on here to get the curves of the face right. Getting that copper color—which represents the Statue of Liberty before it oxidized and turned green—was a smart choice. It makes the red and blue of the Spider-Suits pop in a way that green wouldn't have allowed.
📖 Related: Donald Pee Wee Gaskins Autobiography: What Most People Get Wrong
The "No Way Home" Accuracy Check
Is it 100% movie accurate?
Not really. No set ever is.
In the movie, the scaffolding is much more expansive and honestly, a lot messier. The LEGO version cleans it up. Also, the "Sandman" in this set is basically just a giant tan hand and a torso emerging from the base. It’s a clever part-use, but if you were hoping for a full Flint Marko figure, you might feel a little cheated.
But here’s the thing: LEGO designers have to work off concept art months before the movie actually comes out. They didn't know every single frame of the final fight. The fact that they captured the vibe of the Multiverse collision so well is kind of a miracle.
One detail that hits hard is the inclusion of the hidden laboratory stuff. You can actually pull sections of the build away to reveal little Easter eggs, like the cures the three Peters brewed up to "fix" the villains. It shows that the person who designed this actually watched the movie—or at least read a very detailed script summary.
Comparing the Competitors
There are other Spider-Man sets on the market. There’s the massive Daily Bugle, which is a masterpiece but costs four times as much. There’s the smaller "Final Battle" sets from Spider-Man: Homecoming and Far From Home.
Compared to those, the Spider-Man Final Battle LEGO set occupies a weird middle ground. It’s more expensive than a basic toy but cheaper than a "Black Label" adult collector set. It’s the "Goldilocks" set for people who want a display piece that doesn't require a dedicated piece of furniture to hold it.
Why Collectors Are Hoarding This Specific Set
If you look at the secondary market—sites like BrickLink or eBay—Spider-Man sets usually appreciate well. But this one? This one is different because of the "Triple Spidey" factor.
✨ Don't miss: Bob Roberts: The Jack Black First Movie Performance You Probably Forgot
LEGO rarely puts three versions of the same protagonist in one box. Usually, they’d spread them across three different $50 sets to force you to spend $150 to get the whole "trio." Putting them all in set 76261 was a surprisingly consumer-friendly move.
The minifigures alone are currently driving a lot of the value. Collectors know that once this set retires, the price for a "Tobey Maguire Spider-Man" is going to skyrocket because he’s only appeared in a handful of sets in the last twenty years. Same goes for the Andrew Garfield version.
If you’re buying this as an investment, keep the box. Don’t open it. But honestly? That’s boring. The real joy of this set is posing the figures.
Technical Build Nuances You Might Miss
When you’re actually snapping the bricks together, you’ll notice the head of the statue is surprisingly hollow. This isn't just to save on plastic. It provides structural integrity without making the set top-heavy. If it were solid brick, it would tip over the second you touched it.
The use of the "A-frame" scaffolding is also pretty brilliant from an engineering standpoint. It creates a rigid skeleton that supports the outer "skin" of the statue’s face.
- Part Count: 900 pieces exactly.
- Minifigure Count: 9 (the most in any Spidey set at this price point).
- Dimensions: About 7 inches high, 8 inches wide.
- Build Time: 2 to 3 hours for an experienced builder.
The sand-colored pieces used for the base are actually quite versatile. If you're a "MOC" (My Own Creation) builder, you can harvest those parts for desert landscapes or beach scenes later. But let’s be honest, you’re probably not going to tear this one down.
Common Criticisms and How to Fix Them
Some people hate the stickers. I get it. Applying a tiny sticker to a 1x2 tile is a special kind of torture. In the Spider-Man Final Battle LEGO set, the stickers are mostly used for technical details on the scaffolding or signs.
If you're a perfectionist, use a pair of tweezers. Seriously. It’s the only way to get them centered.
Another gripe is the "empty" space. Some fans felt the set could have been bigger. But a bigger set means a $150 price tag. At its current MSRP, it’s accessible. If you want it to look bigger, the best trick is to integrate it with other tan and gray LEGO plates to create a larger "island" effect on your shelf.
Lastly, the posing rods. They can be a bit finicky. If a figure keeps drooping, try swapping the rod for a slightly shorter one or doubling up on the connection points at the base.
The Cultural Impact of the Battle at the Statue of Liberty
This set represents a turning point in the MCU. It’s the moment the "legacy" of 20 years of filmmaking came together. Having a physical representation of that on your desk is more than just having a toy. It’s a piece of cinema history, translated into Danish plastic.
👉 See also: Why the I Wanna Be Down Remix Lyrics Still Run the Culture
The Statue of Liberty in the movie was being renovated to hold Captain America's shield. The set includes the shield! It’s a small detail, but it ties the broader MCU into the Spider-Man story. It’s these layers of storytelling that make the Spider-Man Final Battle LEGO set feel "complete" in a way that a random building or vehicle doesn't.
Taking Action: What to Do Next
If you’re looking to pick this up, don't wait until it retires. Once a LEGO set goes "Out of Production," the price usually doubles within six months.
- Check retail pricing first. Don't overpay on third-party sites while it's still in stock at major retailers.
- Verify the minifigures. If you're buying used, make sure all three Spider-Men are included. They are the primary value of the set.
- Clear some circular space. This isn't a "back against the wall" set. It needs room to breathe.
- Invest in lighting. Because of the scaffolding, this set looks incredible with a cheap LED light kit. It makes the "lightning" from Electro actually glow.
Whether you're a hardcore LEGO collector or just someone who cried when the three Peters hugged, this set is one of the few that actually lives up to the hype of the movie it's based on. It’s messy, it’s crowded, and it’s a little bit chaotic—just like the movie itself.